IGMP Configuration Command Set
Enabling / Disabling IGMP
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 10-3
Example
This example shows how to display IGMP status:
10.2.1.2 set igmp
Use this command to enable or disable IGMP snooping on the device. This allows a host to inform
the device it wants to receive transmissions addressed to a specific multicast group.
set igmp {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to enable IGMP snooping on the device:
This example shows how to disable IGMP snooping on the device:
Matrix>show igmp
IGMP Snooping is disabled.
enable | disable Enables or disables IGMP snooping on the device.
Matrix>set igmp enable
Matrix>set igmp disable
To Next Page
Loading...
Need help?
General