General Configuration Command Set
Setting User Accounts and Passwords
3-24 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Mode
Super User.
Example
This example shows how to enable a new user account with the login name “netops” with super user
access privileges:
3.2.1.3 clear system login
Use this command to remove a local login user account.
clear system login username
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to remove the “netops” user account:
Matrix>set system login netops su enable
username Specifies the login name of the account to be cleared.
NOTE: The default admin (su) account cannot
be deleted.
Matrix>clear system login netops
To Next Page
Loading...