Port Configuration Command Set
Setting Port Auto-Negotiation and Advertised Ability
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-23
4.3.5.3 show port advertised ability
Use this command to display the advertised ability on one or more ports.
show port advertised ability [port-string [verbose]]
Syntax Description
Command Defaults
If port-string is not specified, advertised ability for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This command shows the display of advertised ability when advertising of flow control has been
enabled with the set port advertised ability command:
port-string (Optional) Displays advertised ability for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.2.
verbose (Optional) Displays more detail about the port’s advertised
ability.
Matrix>show port advertised ability fe.0.1-4
Port Advertised Ability
-------- ------------------------------------------------
fe.0.1 10half 10full 100half 100full full duplex flow control
fe.0.2 10half 10full 100half 100full full duplex flow control
fe.0.3 10half 10full 100half 100full full duplex flow control
fe.0.4 10half 10full 100half 100full full duplex flow control
To Next Page
Loading...
Need help?
General