Enterasys 1G58x-09 - Set Pwa Hostname; Set Pwa Displaylogo

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-68 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.5.3 set pwa hostname
Use this command to set a port web authentication host name. This is a URL for accessing the PWA
login page.
set pwa hostname name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA host name to pwahost:
14.3.5.4 set pwa displaylogo
Use this command to set the display options for the Enterasys Networks logo on the PWA website.
set pwa displaylogo {display | hide}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
name Specifies a name for accessing the PWA login page.
Matrix>set pwa hostname pwahost
display | hide Displays or hides the Enterasys Networks logo when the
PWA website displays.