Enterasys 1G58x-09 - Show Ip Traffic

IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 12-29
Example
This example shows how to display memory usage information for IP protocols:
12.2.5.3 show ip traffic
Use this command to display IP traffic statistics.
show ip traffic [softpath]
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Matrix>Router(config)#show limits
| Entries | Memory (bytes)
( 64MgB) Resource | Max-InUse=Avail | *Each ~= Max InUse
======== | ===== ===== ===== | ===== ======= =======
Dynamic ARPs | 8192 0 8192 | 92 753664 0
Static ARPs | 512 0 512 | 92 47104 0
ARP Requests | 64 0 64 | 28 1792 0
Routing Table | 10000 0 10000 | 168 1680000 0
Static Routes | 512 0 512 | 44 22528 0
IP Helper | 5520 0 5520 | 12 66240 0
Router LSA(type 1) | 200 0 200 | 1672 167200 0
Network LSA(type 2) | 400 0 400 | 1548 619200 0
Summary LSA(type 3) | 2000 0 2000 | 248 496000 0
ASBR Summary LSA(type 4) | 2000 0 2000 | 372 744000 0
External LSA(type 5) | 3000 0 3000 | 372 1116000 0
NSSA LSA(type 7) | 3000 0 3000 | 428 1284000 0
Opaque LSA - link-local(type 9) | 64 0 64 | 1548 99072 0
Opaque LSA - Area-local(type 10) | 512 0 512 | 1548 792576 0
Opaque LSA - Global(type 11) | 64 0 64 | 1548 99072 0
ACL Entries | 1000 0 1000 | 64 64000 0
DVMRP Routes | 10000 0 10000 | 120 1200000 0
Interface Count | 276 0 276 | 508 140208 0
Configured Rip Nets | 300 0 300 | 12 3600 0
Rip Routes | 3000 0 3000 | 28 84000 0
Total: | 9480256 0
softpath (Optional) Displays IP protocol softpath statistics. This
option is used for debugging.