Security Configuration Command Set
Configuring MAC Authentication
14-34 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.3.2 show macauthentication session
Use this command to display the active MAC authenticated sessions on one or more ports.
show macauthentication session [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC session information will be displayed for all
MAC authentication ports.
Example
This example shows how to display MAC session information for Fast Ethernet front panel port 2:
Table 14-4 provides an explanation of the command output.
port-string (Optional) Displays active MAC authenticated sessions for
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.2.
Matrix>show macauthentication session fe.0.2
Port MAC Address Duration Reauth Period Reauthentications
----- ----------------- ---------- ------------- -----------------
fe.0.2 00-60-97-b5-4c-07 525 3600 disabled
Table 14-4 show macauthentication session Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible
port-string values, refer to Section 4.1.2.
MAC Address MAC address associated with the session.
Duration Time, in seconds, this session has been active.
To Next Page
Loading...
Need help?
General