Enterasys 1G58x-09 - Clear Policy Invalid Action

Policy Classification Configuration Command Set
Configuring Policy Profiles
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 8-7
Example
This example shows how to assign a drop action to invalid policies:
8.3.1.6 clear policy invalid action
Use this command to reset the action the device will apply to an invalid or unknown policy to the
default action of applying the default policy.
clear policy invalid action
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the invalid policy action:
Matrix>set policy invalid action drop
Matrix>clear policy invalid action