SNMP Command Set
Configuring SNMP Notification Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-55
5.2.7.8 clear snmp notify
Use this command to clear an SNMP notify configuration.
set snmp notify notify
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the SNMP notify configuration for “hello”:
notify Specifies an SNMP notify name to clear.
Matrix>clear snmp notify hello
To Next Page
Loading...