General Configuration Command Set
Resetting the Device
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-91
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the device’s NVRAM configuration parameters without clearing
the IP address or SSH keys:
NOTE: Clear config will not clear user account settings, such as lockout attempts, login
names and passwords, unless executed by a super user (admin).
Matrix>clear config
This command will clear NVRAM.
Do you want to continue (y/n)
[n]? y
Keep the IP setting (y/n)
[n]? y
Keep the SSH host keys (y/n) [n]? y
Clearing NVRAM..
To Next Page
Loading...