Security Configuration Command Set
Configuring MAC Locking
14-52 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.4.7 set maclock static
Use this command to restrict MAC locking on a port to a maximum number of static (management
defined) MAC addresses for end stations connected to that port.
set maclock static port-string value
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to use restrict MAC locking to 4 static addresses on Fast Ethernet front
panel port 3:
port-string Specifies the port on which to limit MAC locking. For a
detailed description of possible port-string values, refer
to Section 4.1.2.
value Specifies the number of static MAC addresses to be
allowed connections to the port. Valid values are 0 to 20.
The default value is 20.
Matrix>set maclock static fe.0.3 4
To Next Page
Loading...
Need help?
General