Logging and Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11-64 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to set the server at IP address 10.21.1.100
as an SNTP server:
11.2.4.6 clear sntp server
Use this command to remove one or all servers from the SNTP server list.
clear sntp server {all [ip-address | hostname]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove the server at IP address 10.21.1.100
from SNTP server list:
Matrix>set sntp server 10.21.1.100
all Removes all servers from the SNTP server list.
ip-address |
hostname
Specifies the IP address or host name of a server to remove
from the SNTP server list.
Matrix>clear sntp server 10.21.1.100
To Next Page
Loading...