Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
8.3.2 Assigning Classification Rules to Policy Profiles
Purpose
To review, assign and unassign classification rules to user profiles. This maps users to specific
policies provisioning business use of network resources.
Commands
The commands used to review, assign and unassign classification rules to user profiles are listed
below and described in the associated section as shown.
• show policy class (Section 8.3.2.1)
• set policy classify (Section 8.3.2.2)
• clear policy class (Section 8.3.2.4)
• show policy maptable (Section 8.3.2.5)
• show vlanauthorization (Section 8.3.2.6)
• set vlanauthorization (Section 8.3.2.7)
• set policy maptable response (Section 8.3.2.8)
• clear policy maptable response (Section 8.3.2.9)
• set policy maptable (Section 8.3.2.10)
• clear policy maptable (Section 8.3.2.11)
8.3.2.1 show policy class
Use this command to display policy classification information.
show policy class [profile-index]
Syntax Description
Command Defaults
If profile-index is not specified, information will be displayed for all profiles.
profile-index (Optional) Displays policy classification information for a
specific profile index number. Valid values are 1 - 65535.
To Next Page
Loading...
Need help?
General