VLAN Configuration Command Set
Reviewing Existing VLANs
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-7
7.3.1.3 show vlan portinfo
Use this command to display VLAN attributes related to one or more ports.
show vlan portinfo [vlan vlan-list | vlan-name] [port port-string]
Syntax Description
Command Defaults
• If vlan-list or vlan-name are not specified, information for all static VLANs
will be displayed.
• If port-string is not specified, information for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
vlan vlan-list |
vlan-name
(Optional) Displays specific VLAN(s). For VLAN name to
display, it must first be set using the set vlan name
command. For details, refer to Section 7.3.2.2.
port port-string (Optional) Displays the VLAN list for specific port(s). For
a detailed description of possible port-string values, refer to
Section 4.1.2.
To Next Page
Loading...