SNMP Command Set
Disabling / Enabling and Reviewing SNMP Statistics
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-7
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMP engine properties:
Table 5-2 shows a detailed explanation of the command output.
5.2.1.4 show snmp counters
Use this command to display SNMP traffic counter values.
show snmp counters
Syntax Description
None.
Command Defaults
None.
Matrix>show snmp engineid
EngineId: 80:00:15:f8:03:00:e0:63:9d:b5:87
Engine Boots = 12
Engine Time = 162181
Max Msg Size = 2048
Table 5-2 show snmp engineid Output Details
Output What It Displays...
EngineId String identifying the SNMP agent on the device.
Engine Boots Number of times the SNMP engine has been
started or reinitialized.
Engine Time Time in seconds since last reboot.
Max Msg Size Maximum accepted length, in bytes, of SNMP
frame.
To Next Page
Loading...
Need help?
General