Security Configuration Command Set
Configuring Denial of Service Prevention
14-98 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.8.1 show HostDos
Use this command to display Denial of Service security status and counters.
show HostDos
Syntax Description
None,
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router(config)#
Command Defaults
None.
ROUTER: This command can be executed when the device is in router mode only.
For details on how to enable router configuration modes, refer to Section 3.3.3.
NOTE: When fragmented ICMP packets protection is enabled, the Ping of Death
counter will not be incremented. Ping of Death is a subset of the fragmented ICMP
function.
To Next Page
Loading...