VLAN Configuration Command Set
Creating and Naming Static VLANs
7-12 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
7.3.2.4 clear vlan name
Use this command to remove the name of a VLAN from the VLAN list.
clear vlan name vlan-id
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the name for VLAN 9:
vlan-id Specifies the number of the VLAN associated with the
VLAN name to be cleared.
Matrix>clear vlan name 9
To Next Page
Loading...