Security Configuration Command Set
Configuring Denial of Service Prevention
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-101
14.3.8.3 clear hostdos-counters
Use this command to clear Denial of Service security counters.
clear hostdos-counters
Syntax Description
None.
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router(config)#
Command Defaults
None.
Example
This example shows how to clear Denial of Service security counters:
ROUTER: This command can be executed when the device is in router mode only.
For details on how to enable router configuration modes, refer to Section 3.3.3.
Matrix>Router(config)#clear hostdos-counters
To Next Page
Loading...
Need help?
General