Enterasys 1G58x-09 User Manual

Port Priority and Classification Configuration Commands
Configuring Priority Classification
9-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9.3.4 Configuring Priority Classification
Purpose
To perform the following functions:
• Display the current priority, classification, and description entries of each classification rule.
• Assign priorities according to classification rules.
• Add/delete a priority and associated protocol entry.
• Enable or disable the priority tag override feature.
• Assign an 8-bit Type of Service (TOS) value to incoming IP frames.
• Overwrite an existing TOS value.
Commands
The commands used in configuring priority classification are listed below and described in the
associated section.
• show priority classification (Section 9.3.4.1)
• set priority classification (Section 9.3.4.2)
• clear priority classification (Section 9.3.4.4)
• set priority classification ingress (Section 9.3.5.1)
• clear priority classification ingress (Section 9.3.5.2)
• set priority classification tosvalue (Section 9.3.4.5)
• clear priority classification tosvalue (Section 9.3.4.6)
• show priority classification qtagoverride (Section 9.3.4.7)
• set priority classification qtagoverride (Section 9.3.4.8)

Enterasys 1G58x-09 Specifications

General

Brand	Enterasys
Model	1G58x-09
Category	Network Hardware
Language	English