Enterasys 1G58x-09 - Set Ssh Logingracetime; Clear Ssh Keys

Security Configuration Command Set
Configuring Secure Shell (SSH)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-87
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the number of SSH authentication attempts allowed to 1
:
14.3.6.11set ssh logingracetime
Use this command to set the time interval for an SSH client to authenticate.
set ssh logingracetime value
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the SSH login grace time to 120 seconds
(2 minutes):
14.3.6.12clear ssh keys
Use this command to regenerate new SSH authentication keys.
clear ssh keys
Matrix>set ssh passwordguesses 1
value Specifies the number of seconds the client will be allowed
to authenticate. Valid values are from 15 to 600. Default is
60.
Matrix>set ssh logingracetime 120