Enterasys 1G58x-09 User Manual

Startup and General Configuration Summary
Process Overview: CLI Startup and General Configuration
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-13
3.1.5 Process Overview: CLI Startup and General Configuration
Use the following steps as a guide to the startup and general configuration process:
1. Starting and navigating the Command Line Interface (CLI) (Section 3.1.6)
2. Setting user accounts and passwords (Section 3.2.1)
3. Setting basic device properties (Section 3.2.2)
4. Downloading a new firmware image (Section 3.2.3)
5. Configuring Telnet (Section 3.2.4)
6. Managing switch configuration files (Section 3.2.5)
7. Configuring Enterasys and Cisco discovery protocols (Section 3.2.6)
8. Pausing, clearing and closing the CLI (Section 3.2.7)
9. Resetting the device (Section 3.2.8)
10.Preparing the device for router mode (Section 3.3)

Enterasys 1G58x-09 Specifications

General

Brand	Enterasys
Model	1G58x-09
Category	Network Hardware
Language	English