Security Configuration Command Set
Configuring MAC Authentication
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-31
• set macauthentication password (Section 14.3.3.4)
• set macauthentication port (Section 14.3.3.5)
• set macauthentication portinitialize (Section 14.3.3.6)
• set macauthentication macinitialize (Section 14.3.3.7)
• set macauthentication reauthentication (Section 14.3.3.8)
• set macauthentication portreauthenticate (Section 14.3.3.9)
• set macauthentication macreauthenticate (Section 14.3.3.10)
• set macauthentication reauthperiod (Section 14.3.3.11)
• set macauthentication quietperiod (Section 14.3.3.12)
14.3.3.1 show macauthentication
Use this command to display MAC authentication information for one or more ports.
show macauthentication [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC authentication information will be displayed
for all ports.
port-string (Optional) Displays MAC authentication information for
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.2.
To Next Page
Loading...