Policy Classification Configuration Command Set
Assigning Ports to Policy Profiles
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 8-25
8.3.3.3 clear policy port
Use this command to delete one or all policy port entries.
clear policy port port-string | all
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove Fast Ethernet front panel port 21 from a policy profile:
port-string Specifies the port(s) to remove from a policy profile. For
a detailed description of possible port-string values, refer
to Section 4.1.2.
all Deletes all policy port entries.
Matrix>clear policy port fe.0.21
To Next Page
Loading...