SNMP Command Set
Configuring SNMP Users, Groups and Communities
5-24 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
5.2.2.9 clear community
Use this command to delete an SNMPv1 or v2 community name.
clear community community_name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete the community name “green.”
5.2.2.10 show snmp community
Use this command to display the mapping of SNMPv1and v2 community names to SNMPv3 access
policies.
show snmp community [name]
Syntax Description
Command Defaults
If name is not specified, information will be displayed for all SNMP communities.
Command Type
Switch command.
community_name Specifies the SNMP management user access name to be
deleted.
Matrix>clear community green
name (Optional) Displays SNMP information for a specific
community name.
To Next Page
Loading...
Need help?
General