Enterasys 1G58x-09 - Show Flowlimit

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-103
• set flowlimit notification (Section 14.3.9.7)
• set flowlimit clearstats (Section 14.3.9.8)
14.3.9.1 show flowlimit
Use this command to display flow setup throttling information.
show flowlimit [limit] [[port] [port-string]] [[stats] [port-string]]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no optional parameters are specified, detailed flow limiting information will be
displayed for all ports.
limit (Optional) Displays flow limits and actions.
port port-string (Optional) Displays flow limiting port settings for one or
all ports.
stats port-string (Optional) Displays flow limiting statistics for one or all
ports.