General Configuration Command Set
Setting Basic Device Properties
3-34 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Mode
Read-Write.
Example
This example shows how to set the system clock to Saturday, October 31, 2003, 7:50 a.m:
3.2.2.5 set prompt
Use this command to modify the command prompt.
set prompt “prompt_string”
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the command prompt to Switch 1:
Matrix>set time sat 10/31/2003 7:50
prompt_string Specifies a text string for the command prompt. A prompt
string containing a space in the text must be enclosed in
quotes as shown in the example below.
Matrix>set prompt “Switch 1”
Switch 1>
To Next Page
Loading...
Need help?
General