Enterasys 1G58x-09 - Clear Dns Server; Set Dns Server

Logging and Network Management Command Set
Managing Switch Network Addresses
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-51
11.2.3.19set dns server
Use this command to add a server to the DNS server list.
set dns server ip-address
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to add the server at IP address 134.141.92.37 to the DNS server list:
11.2.3.20clear dns server
Use this command to remove a server from the DNS server list.
set dns server ip-address
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
ip-address Specifies an IP address of a DNS server.
Matrix>set dns server 134.141.92.37
ip-address Specifies an IP address of a DNS server.