Enterasys 1G58x-09 - Clear Summertime; Set Console Baud

General Configuration Command Set
Setting Basic Device Properties
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-47
3.2.2.20 clear summertime
Use this command to clear the daylight savings time configuration.
clear summertime
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the daylight savings time configuration:
3.2.2.21 set console baud
Use this command to set the console port baud rate.
set console baud rate
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Matrix> clear summertime
rate Specifies the console baud rate. Valid values are 38400, 19200,
9600, 4800, and 2400.