Security Configuration Command Set
Configuring RADIUS
14-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.1.1 show radius
Use this command to display the current RADIUS client/server configuration.
show radius [last-resort-action] [retries] [server [index]] [timeout]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no parameters are specified, all RADIUS configuration information will be
displayed.
last-resort-action (Optional) Displays last resort action settings. This is the
action to be taken if the RADIUS server times out during
local or remote login.
retries (Optional) Displays the maximum number of attempts a
user can contact the RADIUS server before timing out.
server index (Optional) Displays all or a specific server configuration.
timeout (Optional) Displays the maximum amount of time (in
seconds) to establish contact with the RADIUS server
before timing out.
To Next Page
Loading...
Need help?
General