VLAN Configuration Command Set
Setting the Host VLAN
7-40 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to set VLAN 7 as the host VLAN:
7.3.6.3 clear host vlan
Use this command to reset the host VLAN to the default setting of 1.
clear host vlan
Syntax Description
None.
Command Defaults
None.
Command Type
Switch Command.
Command Mode
Read-Write.
Example
This example shows how to set the host VLAN to the default setting:
Matrix>set port vlan host 7
Matrix>clear host vlan
To Next Page
Loading...
Need help?
General