Enterasys 1G58x-09 - Set Vlan Name

VLAN Configuration Command Set
Creating and Naming Static VLANs
7-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Type
Switch command.
Command Mode
Read-Write.
Command Alternative (v2.05.xx and previous)
set vlan vlan-list {create | enable | disable}
Examples
This example shows how to create VLAN 3:
This example shows how to disable VLAN 3:
7.3.2.2 set vlan name
Use this command to set the ASCII name for a new or existing VLAN. Once set, you can use the
vlan-name interchangeably with the vlan-id in the show vlan, show vlan static and show vlan
dynamicegress commands.
set vlan name vlan-id | vlan-name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Matrix>set vlan create 3
Matrix>set vlan disable 3
vlan-id Specifies the VLAN to be named.
vlan-name Specifies the string used as the name of the VLAN (1 to 32
characters).