VLAN Configuration Command Set
Creating and Naming Static VLANs
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-11
Example
This example shows how to set the name for VLAN 7 to green:
7.3.2.3 clear vlan
Use this command to remove one or more static VLANs from the list of VLANs recognized by the
device.
clear vlan vlan-list
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove a static VLAN 9 from the device’s VLAN list:
Matrix>set vlan name 7 green
vlan-list Specifies the VLAN(s) to be removed.
Matrix>clear vlan 9
To Next Page
Loading...
Need help?
General