EasyManuals Logo

Enterasys 1G58x-09 User Manual

Enterasys 1G58x-09
808 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #692 background imageLoading...
Page #692 background image
Security Configuration Command Set
Configuring RADIUS
14-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.1.4 show radius accounting
Use this command to display the RADIUS accounting configuration. This transmits accounting
information between a network access server and a shared accounting server.
show radius accounting [server [index] | counter [index] | retries [index] |
timeout [index] | intervalminimum | updateinterval]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no parameters are specified, all RADIUS accounting configuration information
will be displayed.
server index (Optional) Displays one or all RADIUS accounting server
configurations.
counter index (Optional) Displays counters for one or all active RADIUS
accounting servers.
retries (Optional) Displays the maximum number of attempts to
contact the RADIUS accounting server before timing out.
timeout (Optional) Displays the maximum amount of time (in
seconds) to establish contact with the RADIUS accounting
server before timing out.
intervalminimum (Optional) Displays the minimum update interval setting.
This controls the frequency of RADIUS accounting
updates.
updateinterval (Optional) Displays the number of seconds between each
RADIUS accounting interim update (when accumulated
accounting data is sent to the server for a session.)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Enterasys 1G58x-09 and is the answer not in the manual?

Enterasys 1G58x-09 Specifications

General IconGeneral
BrandEnterasys
Model1G58x-09
CategoryNetwork Hardware
LanguageEnglish