General Configuration Command Set
Setting User Accounts and Passwords
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-29
Example
This example shows how to set login attempts to 5:
3.2.1.9 set system lockout
Use this command to set the number of minutes the admin user account will be locked out after the
maximum number of failed attempts to log on to the switch.
set system lockout time
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to set lockout time to 30 minutes:
Matrix>set system lockout attempts 5
time Specifies the number of minutes the default admin user
account will be locked out after the maximum login
attempts.Valid values are 0 to 60.
Matrix>set system lockout 30
To Next Page
Loading...