Security Configuration Command Set
Configuring MAC Authentication
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-35
14.3.3.3 set macauthentication
Use this command to globally enable or disable MAC authentication.
set macauthentication {enable | disable}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to globally enable MAC authentication:
Reauth Period Reauthentication period for this port, set using the set
macauthentication reauthperiod command described in
Section 14.3.3.11.
Reauthentications Whether or not reauthentication is enabled or disabled on
this port. Set using the set macauthentication
reauthentication command described in Section 14.3.3.8.
enable | disable Globally enables or disables MAC authentication.
Matrix>set macauthentication enable
Table 14-4 show macauthentication session Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
Need help?
General