Logging and Network Management Command Set
Monitoring Switch Network Events and Status
11-28 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display statistics for all the current active network connections:
Table 11-4 provides an explanation of the command output.
11.2.2.8 show rmon stats
Use this command to display RMON statistics for one or more ports.
show rmon stats [port-string]
Matrix>show netstat
Active Internet connections (including servers)
PCB Proto Recv-Q Send-Q Local Address Foreign Address (state)
-------- ----- ------ ------ ------------------ ------------------ -------
1cc6314 TCP 0 0 0.0.0.0.80 0.0.0.0.0 LISTEN
1cc6104 TCP 0 0 0.0.0.0.23 0.0.0.0.0 LISTEN
1cc6290 UDP 0 0 0.0.0.0.162 0.0.0.0.0
1cc620c UDP 0 0 0.0.0.0.161 0.0.0.0.0
Table 11-4 show netstat Output Details
Output What It Displays...
PCB Protocol Control Block designation.
Proto Type of protocol running on the connection.
Recv-Q Number of queries received over the connection.
Send-Q Number of queries sent over the connection.
Local Address IP address of the connection’s local host.
Foreign Address IP address of the connection’s foreign host.
(state) Communications mode of the connection (listening, learning
or forwarding).
To Next Page
Loading...
Need help?
General