Enterasys 1G58x-09 - Clear Maclock Autostatic

Security Configuration Command Set
Configuring MAC Locking
14-60 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.4.16clear maclock autostatic
Use this command to clear the MAC locking autostatic configuration(s) on one or more ports.
clear maclock autostatic [port-string] | [isl port-string | publicmac | publicvlan
{egress | ingress} | passthroughmac]
Syntax Description
Command Defaults
If no arguments are specified, all autostatic configurations will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the MAC locking autostatic function on Fast Ethernet front panel
port 3 back to the default state of disabled:
isl port-string Resets autolearning of the autostatic public VLAN back
to the default state of disabled for one or more ports.; ; or
clears the public VLAN ID on specified ports.
publicmac Clears the autostatic public MAC address.
publicvlan egress |
ingress
Clears the autostatic public egress or ingress VLAN.
passthroughmac Clears the MAC multicast pass through address.
port-string (Optional when isl is not specified.) Clears/resets the
MAC locking autostatic configuration on specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.2.
Matrix>clear maclock autostatic fe.0.3