Security Configuration Command Set
Configuring MAC Authentication
14-32 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display MAC authentication information for Fast Ethernet front panel
ports 1 through 15:
Table 14-3 provides an explanation of the command output.
Matrix>show macauthentication fe.0.1-15
MAC authentication - disabled
MAC user password - NOPASSWORD
Port username significant bits - 48
Port Port Quiet Reauth Auth Auth Reauthentications
State Period Period Allowed Allocated
------- -------- ---------- ---------- -------- --------- -----------------
fe.0.1 disabled 30 3600 1 1 disabled
fe.0.2 disabled 30 3600 1 1 disabled
fe.0.3 disabled 30 3600 1 1 disabled
fe.0.4 disabled 30 3600 1 1 disabled
fe.0.5 disabled 30 3600 1 1 disabled
fe.0.6 disabled 30 3600 1 1 disabled
fe.0.7 disabled 30 3600 1 1 disabled
fe.0.8 disabled 30 3600 1 1 disabled
fe.0.9 disabled 30 3600 1 1 disabled
fe.0.10 disabled 30 3600 1 1 disabled
fe.0.11 disabled 30 3600 1 1 disabled
fe.0.12 disabled 30 3600 1 1 disabled
fe.0.13 disabled 30 3600 1 1 disabled
fe.0.14 disabled 30 3600 1 1 disabled
fe.0.15 disabled 30 3600 1 1 disabled
Table 14-3 show macauthentication Output Details
Output What It Displays...
MAC
authentication
Whether MAC authentication is globally enabled or
disabled. Set using the set macauthentication command as
described in Section 14.3.3.3.
MAC user
password
User password associated with MAC authentication on the
device. Set using the set macauthentication password
command as described in Section 14.3.3.4.
To Next Page
Loading...
Need help?
General