Enterasys 1G58x-09 - Show Pwa

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-64 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
• set pwa nameservices (Section 14.3.5.6)
• set pwa ipaddress (Section 14.3.5.7)
• set pwa protocol (Section 14.3.5.8)
• set pwa enhancedmode (Section 14.3.5.9)
• set pwa guestname (Section 14.3.5.10)
• set pwa guestpassword (Section 14.3.5.11)
• set pwa gueststatus (Section 14.3.5.12)
• set pwa initialize (Section 14.3.5.13)
• set pwa quietperiod (Section 14.3.5.14)
• set pwa maxrequests (Section 14.3.5.15)
• set pwa portcontrol (Section 14.3.5.16)
14.3.5.1 show pwa
Use this command to display port web authentication information.
show pwa
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.