Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
8.3.2.4 clear policy class
Use this command to delete one or all policy classification entries.
clear policy class profile-index | all
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete all policy classification entries:
Ethertype Field / DSAP/SSAP Fields 13
VLAN 14
Priority 15
profile-index Specifies the profile index number of the policy
classification to be deleted. Valid values are 1 to 65535.
all Deletes all policy classification entries.
Matrix>clear policy class all
Table 8-3 Classification Precedence (Continued)
To Next Page
Loading...