Enterasys 1G58x-09 - Clear Dns Domain

Logging and Network Management Command Set
Managing Switch Network Addresses
11-50 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the DNS domain name to “net.com”:
11.2.3.18clear dns domain
Use this command to clear the DNS domain name.
clear dns domain
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the DNS domain name:
domain-name Specifies a DNS domain name.
Matrix>set dns domain net.com
Matrix>clear dns domain