Enterasys 1G58x-09 User Manual

SNMP Command Set
Configuring SNMP Users, Groups and Communities
5-18 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to remove the SNMP user named “bill”:
5.2.2.4 show snmp group
Use this command to display an SNMP group configuration. An SNMP group is a collection of
SNMPv3 users who share the same access privileges.
show snmp group [groupname] [user user] [security-model {v1 | v2 | v3}]
Syntax Description
Command Defaults
• If groupname is not specified, information about all SNMP groups will be
displayed.
• If user is not specified, information about all SNMP users will be displayed.
• If security-model is not specified, user information about all SNMP versions
will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Matrix>clear snmp user bill
groupname
groupname
(Optional) Displays information for a specific SNMP
group.
user user (Optional) Displays information about users within the
specified group.
security-model v1 |
v2 | v3
(Optional) Displays information about groups assigned to
a specific security SNMP model.

Enterasys 1G58x-09 Specifications

General

Brand	Enterasys
Model	1G58x-09
Category	Network Hardware
Language	English