Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 8-1
8
Policy Classification Configuration
This chapter describes the Policy Classification set of commands and how to use them.
8.1 POLICY CLASSIFICATION CONFIGURATION SUMMARY
Matrix E1 Series devices support policy profile-based provisioning of network resources by
allowing IT administrators to:
• Create, change or remove user roles or profiles based on business-specific use of network
services.
• Permit or deny access to specific services by creating and assigning classification rules which
map user profiles to frame filtering policies.
• Assign or unassign ports to policy profiles so that only ports activated for a profile will be
allowed to transmit frames accordingly.
8.2 PROCESS OVERVIEW: POLICY CLASSIFICATION
CONFIGURATION
Use the following steps as a guide to configure policy classification on the device:
1. Configuring policy profiles (Section 8.3.1)
2. Assigning classification rules to policy profiles (Section 8.3.2)
3. Assigning ports to policy profiles (Section 8.3.3)
NOTE: It is recommended that you use Enterasys Networks NetSight Atlas Policy
Manager as an alternative to CLI for configuring policy classification on Matrix E1 Series
devices.
To Next Page
Loading...
Need help?
General