Enterasys 1G58x-09 - Clear Policy Maptable

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-22 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to configure policy profile 6 to authenticate for VLAN 10:
8.3.2.11 clear policy maptable
Use this command to clear policy profile mapping to one or more VLANs.
clear policy maptable [vlan-list]
Syntax Description
Command Defaults
If vlan-list is not specified, policy to VLAN mapping will be cleared for all
VLANs.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the policy profile mapping for VLAN 10:
Matrix>set policy maptable 10 6
vlan-list (Optional) Specifies the VLAN(s) for which policy to
VLAN mapping will be cleared.
Matrix>clear policy maptable 6