Enterasys 1G58x-09 - Set Maclock Autostatic Publicmac

Security Configuration Command Set
Configuring MAC Locking
14-58 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Mode
Read-Write.
Example
This example shows how to assign VLAN 3 as the public ingress VLAN for autostatic MAC
locking:
14.3.4.14set maclock autostatic publicmac
Use this command to set the public MAC address to which all ports communicate when MAC
locking autostatic is enabled.
set maclock autostatic publicmac mac-address
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign MAC address 00-a0-c9-0d-32-11 as the public autostatic MAC
locking address:
Matrix>set maclock autostatic publicvlan 3 ingress
mac-address Specifies a MAC address.
Matrix>set maclock autostatic publicmac 00-a0-c9-0d-32-11