Security Configuration Command Set
Configuring MAC Locking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-57
Syntax Description
Command Defaults
If disable is not specified, automatic learning will be enabled.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the automatic learning of the MAC locking autostatic public
VLAN on Fast Ethernet front panel port 3:
14.3.4.13set maclock autostatic publicvlan
Use this command to set the public ingress or egress VLAN that can be used with autostatic MAC
locking.
set maclock autostatic publicvlan vlan-id {ingress | egress}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
port-string Specifies the port(s) on which to enable or disable the
auto learning function. For a detailed description of
possible port-string values, refer to Section 4.1.2.
enable | disable (Optional) Enables or disables the auto learning function.
Matrix>set maclock autostatic isl fe.0.3 enable
vlan-id Specifies a VLAN ID.
ingress | egress Specifies whether to use the VLAN as an ingress or
egress VLAN.
To Next Page
Loading...