Port Configuration Summary
Port String Syntax Used in the CLI
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-5
For example: The Matrix E1 1H582-51 has 48 front panel ports (group 0), and the number of ports
in group 1, 2, or 3 is dependent on the expansion module installed in the slot.
Examples
This example shows the port-string syntax for specifying Fast Ethernet port 3 in the device’s fixed
front panel.
This example shows the port-string syntax for specifying Fast Ethernet ports 1 through 10 in the
device’s fixed front panel.
This example shows the port-string syntax for specifying Fast Ethernet ports 1, 3, 7, 8, 9 and 10 in
the device’s left expansion module slot.
This example shows the port-string syntax for specifying Gigabit Ethernet port 2 in the device’s
right expansion module slot.
This example shows the port-string syntax for specifying all Gigabit Ethernet ports in the device’s
left expansion module slot.
This example shows the port-string syntax for specifying all Fast Ethernet ports in the device.
This example shows the port-string syntax for specifying all ports (of any interface type) in the
device.
fe.0.3
fe.0.1-10
fe.1.1,fe.1.3,fe.1.7-10
ge.3.2
ge.1.*
fe.*.*
*.*.*
To Next Page
Loading...