Port Configuration Command Set
Reviewing Port Status
4-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and traffic
through the device for Fast Ethernet front panel port 1:
This example shows how to display all port counter statistics related to traffic through the device.
Table 4-3 provides an explanation of the command output.
Matrix>show port counters fe.0.1
Port: fe.0.1 Bridge Port: 1
---------------------------------------
MIB2 Interface Counters:
In Octets: 0
In Unicast Pkts: 0
In Multicast Pkts: 0
In Broadcast Pkts: 0
In Discards: 0
In Errors: 0
In Unknown Protocol: 0
Out Octets: 0
Out Unicast Pkts: 0
Out Multicast Pkts: 0
Out Broadcast Pkts: 0
Out Discards: 0
Out Errors: 0
Out Queue Length: 0
802.1Q Switch Counters:
Frames Received: 0
Frames Transmitted: 0
Matrix>show port counters fe.0.1 switch
Port: fe.0.1 Bridge Port: 1
802.1Q Switch Counters:
----------------------
Frames Received: 0
Frames Transmitted: 0
To Next Page
Loading...