Port Configuration Command Set
Setting Port Auto-Negotiation and Advertised Ability
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-25
This example shows how to display advertised ability on all ports. Since this example does not
display flow control, advertising flow control was not enabled with the set port advertised ability
command.
Matrix>show port advertised ability
Port Advertised Ability
-------- ------------------------------------------------
fe.0.1 10half 10full 100half 100full
fe.0.2 10half 10full 100half 100full
fe.0.3 10half 10full 100half 100full
fe.0.4 10half 10full 100half 100full
fe.0.5 10half 10full 100half 100full
fe.0.6 10half 10full 100half 100full
fe.0.7 10half 10full 100half 100full
fe.0.8 10half 10full 100half 100full
fe.0.9 10half 10full 100half 100full
fe.0.10 10half 10full 100half 100full
fe.0.11 10half 10full 100half 100full
fe.0.12 10half 10full 100half 100full
fe.0.13 10half 10full 100half 100full
fe.0.14 10half 10full 100half 100full
fe.0.15 10half 10full 100half 100full
fe.0.16 10half 10full 100half 100full
fe.0.17 10half 10full 100half 100full
fe.0.18 10half 10full 100half 100full
fe.0.19 10half 10full 100half 100full
--More--
To Next Page
Loading...
Need help?
General