Port Configuration Command Set
Configuring Link Aggregation
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-69
Command Mode
Read-Write.
Examples
This example shows how to place ports ge.0.1 and ge.0.2 in the same LAG by assigning both
padminkey 1:
This example shows how to clear the LAG created:
This example shows how to disable LACP processing on all Gigabit Ethernet front panel ports:
Matrix>set port lacp padminkey ge.0.1 1
Matrix>set port lacp padminkey ge.0.2 1
Matrix>set port lacp padminkey ge.0.* default
Matrix>set port lacp disable ge.0.*
To Next Page
Loading...