SNMP Command Set
Disabling / Enabling and Reviewing SNMP Statistics
5-12 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
snmpOutGetNexts Number of SNMP Get-Next PDUs generated by
the SNMP protocol entity.
snmpOutSetRequests Number of SNMP Set-Request PDUs generated
by the SNMP protocol entity.
snmpOutGetResponses Number of SNMP Get-Response PDUs
generated by the SNMP protocol entity.
snmpOutTraps Number of SNMP Trap PDUs generated by the
SNMP protocol entity.
snmpSilentDrops Number of SNMP Get, Set, or Inform request
error messages that were dropped because the
reply was larger than the requestor’s maximum
message size.
snmpProxyDrops Number of SNMP Get, Set, or Inform request
error messages that were dropped because the
reply was larger than the proxy target’s
maximum message size.
usmStatsUnsupportedSec
Levels
Number of packets received by the SNMP engine
that were dropped because they requested a
security level that was unknown to the SNMP
engine or otherwise unavailable.
usmStatsNotInTimeWindows Number of packets received by the SNMP engine
that were dropped because they appeared outside
of the authoritative SNMP engine's window.
usmStatsUnknownUserNames Number of packets received by the SNMP engine
that were dropped because they referenced a user
that was not known to the SNMP engine.
usmStatsUnknownEngineIDs Number of packets received by the SNMP engine
that were dropped because they referenced an
snmpEngineID that was not known to the SNMP
engine.
Table 5-3 show snmp counters Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
Need help?
General